LCR Meter, komponent Tester - UNI-T UT622C

1.849,00 kr.
Midlertidigt udsolgt 7-15 dages levering
Varenummer
TOL-10370
Levering fra 45 kr.
Varenr: TOL-10370

Laveste fragtpris: 45,- - Fri fragt fra 800,-

Produktet er midlertidigt udsolgt.
Leverandør: Henter data...
Bestil inden 16:00 mandag til fredag og vi leverer i morgen med PostNord, såfremt alle varer er på lager.
✓ Trustpilot: 9.6 ✓ Dansk lager ✓ 4500+ faste kunder

The UT622C is a high performance, portable component (LCR) meter that can measure inductors, resistors and capacitors and their secondary characteristics (D (dissipation factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in radians) and ESR (equivalent series or parallel resistance)). The parameters of the components are measured by AC voltage with selectable frequency of 100, 120, 1000, 10000, 100000 Hz and selectable amplitude of 0.1 Vrms, 0.3 Vrms, 1.0 Vrms at the output impedance of the signal source 100Ω. Here, the highest measurement accuracy is 0.1%. On the 2.8-inch TFT LCD display of the device, all measurements can be displayed accurately. 

In summary, the UT622C is perfectly suited for professional users who are looking for a high-quality and accurate LCR meter (component tester). 

The UT622C complies with all EU safety standards. 

 

UNI-T UT622C LCR Meter Features 
manual LCR meter for primary and secondary parameters of components 
automatic component identification 
measurement with AC voltage 100, 120, 1000, 10000 or 100000 Hz 
large backlit TFT LCD display with 10 brightness levels 
the display range is maximum 99999 counts maximum 
accuracy 0,1 
possibility to select components according to given tolerances 
selectable amplitude measuring voltage 0.1 Vrms, 0.3 Vrms, 1.0 Vrms 
equivalent mode selection (for Z <100Ω serial, for Z <10kΩ parallel) 
mini-USB interface for data transfer to PC / charging the device 
built-in high capacity battery: 1800 mAh 
power supply: rechargeable battery or AC adapter 
running time with one battery charge: approx. 8 hours 
functions in recording mode and data statistics: AVG (average), MAX, MIN 
automatic switch-off: yes after 5, 15, 30, 60 minutes 
audible and visual alarm for comparison of tolerance results 
reset open circuit or short circuit tester: yes 
setting of tolerance value from nominal value: 1 % to 20 %, default 5 % 
component counting: all, compliant, non-compliant 
scope of delivery: UT622C instrument, USB interface cable, 4-pin Kelvin measuring cable UTR-L100K-H, software for PC (CD), gold-plated short-circuit board UTR-001

Mere information
Brand UNI-T
Producent varenummer UT622C
Vægt (kg) 0.100000
Indsend din bedømmelse
Du anmelder:LCR Meter, komponent Tester - UNI-T UT622C
Din bedømmelse